• Best Technology Co., Ltd

News
Home   /   News  /  
What should be paid attention to in the bending process of FPC? 2023-02-28

What should be paid attention to in the bending process of FPC?

Flexibility is the most obvious advantage for flex PCB, but we should maintain a degree during use, not just bend casually, so what should we pay attention to when bending? BESTFPC1 bestfpc2 Although the FPC can be bent, if it is b
Why the FPC can not use HASL surface treatment? 2023-02-28

Why the FPC can not use HASL surface treatment?

The hot air solder leveling is a technology developed for the coating of lead-tin on rigid printed circuit boards. Due to the simplicity of this technology, it is also applied to flexible printed board FPC. But we usually don't suggest to use HASL and
What is the difference between FPC coverlay and EMI shield? 2023-02-28

What is the difference between FPC coverlay and EMI shield?

Covering is the film that covers and presses on the surface of the flexible circuit, usually polyimide resin, used for solder mask, etc., and has little effect on signal shielding. The Electro-Magnetic Interference (EMI) shield is generally attached to th
What’s the difference between PI base material, PI coverlay, and PI stiffener? 2023-02-27

What’s the difference between PI base material, PI coverlay, and PI stiffener?

temperature in -200℃~426℃. Polyimide(PI) is very common in Flexible Board, it exist in base material, coverlay, even stiffener. Maybe some people feel confused about it, so today let discuss what’s the difference between them? The dif
How to choose the FPC stiffener? | Rigid-Flex Blog 2023-02-27

How to choose the FPC stiffener? | Rigid-Flex Blog

 Flexible PCB -Flexible Printed Circuits are made of thin dielectric substrate & high ductility metal foil, flexible pcb can be bent or folded and used in static and dynamic applications.  Do you know why the fpc need to add the stif
Which kind of FPC can be replaced by FFC?-Rigid-Flex Blog 2023-02-27

Which kind of FPC can be replaced by FFC?-Rigid-Flex Blog

FFC (flexible flat cables) are a type of ribbon cable, so named due to their wide flat structure. They are usually a straight connector, without any additional components. The lines are straight and the spacing is fixed. Standard FFC BFS17386-
What should we pay attention to EMI shield design? 2023-02-25

What should we pay attention to EMI shield design?

Rigid-Flex Blog
What should we pay attention to FPC with dome switch design? 2023-02-25

What should we pay attention to FPC with dome switch design?

Best Technology FPC & Rigid-Flex Blog
The different design way of pluggable connector on FPC-BESTFPC PRODUCTS CENTER 2023-02-24

The different design way of pluggable connector on FPC-BESTFPC PRODUCTS CENTER

Bestfpc-Blog
What is the difference between solid copper and grid copper?-Bestfpc New 2023-02-24

What is the difference between solid copper and grid copper?-Bestfpc New

There are two different design of copper trace, namely solid copper and grid copper. Do you know what is the difference between solid copper and grid copper?   Solid copper has the dual functions of increasing current and sh
Factors Affecting the FPC Connector 2023-02-23

Factors Affecting the FPC Connector

Best Technology FPC & Rigid-Flex Blog
The Advantages of Rigid-flex PCB 2023-02-23

The Advantages of Rigid-flex PCB

Best Technology FPC & Rigid-Flex Blog
+86-755 2909-1601/1602/1603
sales@bestfpc.com
Factory Address: 5F, Bld7, Hengmingzhu Technology Industry Park, Xingqiao Tongfuyu Industry Zone, Gonghe, Shajing Town, Baoan District, Shenzhen，China
Leave us a message

links: FR4 PCB Dome Array Ceramic PCB

Copyright ©2022 Best Technology Co., Ltd.

Privacy Policy Technical Support: Magic Lamp - Website Sitemap