Did you heard of etch 6L FPC to be 2L FPC?

We received a special project, one of our customer need 2L FPC, and want the thickness between two copper layers to be 0.15mm. Because this customer is specialized in RF product, he need so thick dielectric(0.15mm) between two copper layers.

What does it means?

  1. Firstly, for adhesive material, it means “adhesive + Polyimide + adhesive” should meet 0.15mm. If Adhesive is 25um, two adhesive layer totally 50um, the minimum Polyimide thickness will be 4mil.
  2. Secondly, for 4mil Polyimide, it usually refers to adhesive-less material. So if deduct 50um adhesive, it require 6mil adhesiveless material. 6mil adhesiveless PI is very hard to purchase, need to customize, have MOQ limit, and lead time will be very long.

Is there any solution to meet customer’s need?

After discussed with our engineers and manufacture department, we put forward one suggestion. Draw an stack up with 6L FPC, it’s made up of three double-sided FPC. Etch out one copper layers in TOP and Bottom double-sided FPC. And for the middle double-sided FPC, we’ll etch out two copper layers, only leave Polyimide and adhesive. 

By doing this, it finally will only leave two copper layers, and the thickness between two copper layers is 0.15mm. (As below stack up show)

To be honest, when customer put forward to his design requirement, I was amazed, 0.15mm material is so hard to purchase. But our engineers and manufacture department find a good solution for our customer. Our customer are satisfied with our work.

If you have similar need, pls feel free to contact us. We can help you make it come ture.

You may also like

How much do you know about FPC surface finish

How many types of FPC surface treatment have you ever seen? FPC & Rigid flex is unlike Rigid FR4 PCB, there are less types of surface treatment in flexible PCB manufacturing, and most of flex pcb defult ENIG 1u’’ for flex pcb and rigid flex pcb. Please refer to the following FPC surface finishing:

  1. Electroless nickel immersion gold (ENIG or ENi/IAu), also known as immersion gold (Au), chemical Ni/Au or soft gold, is a metal plating process used in the manufacture of flexible printed circuit boards (FPCs), to avoid oxidation and improve the solderability of copper contacts and plated through-holes. It consists of an electroless nickel plating, covered with a thin layer of gold, which protects the nickel from oxidation. The gold is typically applied by quick immersion in a solution containing gold salts.

In generally, we will default as ENIG 1u’’ for customers if there are no any special requirements from our customer. There are also some special requirements from our customer, such the whole FPC surface area need to ENIG, it is very expensive. And there are also some customers may need hard gold plating (30~50u’’)for gold finger area.  

Hard-gold-plating

The advantages of Immersion gold( ENIG) will have very smooth surface, long storage time, easy for PCB soldering; suitable for fine pitch components and thin PCB board. It is more suitable for FPC just because of the thinner thickness.

2.Organic solderable protective layer (OSP) This process refers to cover the exposed bare PCB copper surface with a specific organic material.

OSP

Advantages: Can ensure a very flat surface, in line with environmental requirements. It’s cheaper compared with other surface finish.

Disadvantages: Once removed, the bare copper is exposed and subject to oxidation. Need to use conventional wave soldering and selective wave soldering process PCBA, does not allow the use of OSP surface treatment process. And it has a very limited shelf life.

2. ENEPIG (Electroless Nickel Electroless Palladium Immersion Gold) , ENEPIG is an acronym for Electroless Nickel Electroless Palladium Immersion Gold. This type of finish offers abundant benefits that make it suitable for a variety of applications.When we consider the final finish performance in a variety of different assembly methods, it can be seen that ENEPIG is suitable for a wide range of assembly requirements. The only one disadvantage of ENIPIG is the price is the most expensive.

ENEPIG

In conlusion, we sumarized the OSP and ENIG and ENEPIG some characteristics as a form as below, please kindly check it. Sincerely hope it will be helpful for you. If you have any quetions or would like to learn more details, warmly welcome you to contact us at sales@bestfpc.com

suface-finish-form

You may also like