Best Technology Team had came back on this Monday,after Chinese New year holiday,Best Technology Team went Climbing on our first Working day,but a part of our colleagues cannot go climbing due to they had a large number of work to do on first Working days after a long holiday.so you can not see all of our colleagues in the pictures as below.
Our unity and brotherhood, help each other on working and life
Best Technology Team on the top of Mountain
So now,everything goes well,and we can still offer good products,service and lead time after a long Chinese New year.Don’t hesitate to Contact us if any questions.Also,pls visit our website for more information if you would like to know Single Sided FPC,Dual Access FPC ,Double Sided FPC,Multi-Layer FPC ,Rigid-Flex,and you can send email or call to us if you would like get more information or help.
Best Technology team have enrolled 2015 Shenzhen International Marathon and finally some of us lucky enough to get the ticket to attend the Marathon, and finished it successfully!
More important is: They’re happy in joining that sport, enjoying the atmosphere. At the same time, they challenged themselves! After joined the Marathon, they spent more time on exercise every week, even sometimes felt very tired after in the evening. After that, they feeling more powerful!
Lily & Peter after Marathon
Some of Best Tech Team members at 2015 Shenzhen Marathon
Wish everybody more happy, more healthy in 2016! And remember we always to be your most reliable partner of flex circuits, rigid-circuit board in China!
It’s a terrible news to hear shooing happened in Connecticut school on Dec 15th.
Sincerely hope the similar thing will not happened again and peaceful environment will come back to the Town and whole word.
May God Bless The people and their family!
Best Technology Co., Ltd.
Updated: Here are comments from some of our customers in US:
” It was a very bad and I certainly hope this craziness stops * it is heartless”- by Dorothy
“Thanks for your well wishes and prayer for my family and all the families that were devastated by gross act of evil. None of this affected my family personally but it was heartfelt by us all here in America and abroad.” by Tony
“We were also in shock with that news. It is hard to understand how could anybody make the decision to shoot any people, but it is harder how could anybody decided to kill such innocent people like those children that died in this tragedy.” by Doug
“This was something unexpected and this leads us to reflect and analyze the care we we’re putting our children. I believe that this event should not have happened, but time does not return and we must learn from this hard lesson.” By Nubia
“Keep praying for God’s comfort and strength for the family who lost their loved ones.” by Soni
As is well known, solderability is very important for the printed circuit boards, we must do solderability test of each batch PCB we made. In this way we can inspect the weldability of the PCB before we go ahead the assembly process, much helpful for SMT.
Today we are going to discuss the solderability test experiment. In order to explain it more clear, we now do a simple solderability test and show you all the steps.
1. Take a small solder pot, plug in the power, turn on the switch and heat the solder pot to a certain high temperature(about 8 minutes).
2. Put a tin bar to the solder pot, then you can see the tin bar is begin to melting, slowly into liquid tin, then more and more.
3. After few minutes, there will be enough melting liquid tin in the solder pot to do this test.
4.Use a tweezers to pick up a PCB circuit, first clean the PCB with rubbing alcohol. Because the unclear surface or the oxidation of the PCB will affect the test result.
5. This is the key step of this test, put the PCB into the solder pot, depth about 2 mm,time 4-5 seconds is ok. Then you can see the tin will go into the hole of the PCB.
6. Take out the PCB from the solder pot and put it into the cold water. After few seconds, you can see the experimental effect.
This solderability test is very simple and easy. We can see the results very soon. Our Best Technology did solderability of every batch PCB we made, and we also supply our customers with the solderability test report and the test samples.
When news come in, no one can believe it. I think, is it a rumor? But few hours later, we have to accept the fact. 9.0 Earthquake really happened in Japan! It is one of bigger disaster recently happened in the world. Remember last time in China, the earthquake is only 8, but it has caused uncountable lost for us. We really hope this bad condition will be finished very soon.
Express our deep sympathy for Japanese and May God Bless them!