American Customers Visiting us after Mid-Autumn Festival

On Sep 19th, Our America customer Julie and Sonic visited us. The main topics we discussed the flexible circuit board and assembly (PCBA).

Firstly we do a sample introduced for whole FPC production process to Julie and sonic. During our production, we are strictly carry out all the production process conform with ISO9001:2008.

FPC IQC process checking

FPC IQC process checking

From the FPC raw material IQC incoming quality inspection, warehouse material management (first in first out management principle), the standard operating procedure thru production process: from flex circuit board raw material (Polyimide) cutting, drilling, lamination, stiffener/adhesive tape assembling, silkscreen, IC programming, trace & via opening & shorting and function testing, to final flex circuit board out-going inspection.

 

During this period, we are mainly introduced coverlay lamination process for flexible circuit board,

FPC lamination process visiting

FPC lamination process visiting

 

 

 

 

 

 

 

automatic stiffener assembly machine for Flex PCB,

Auto Stiffener assembly

Auto Stiffener assembly

 

 

 

 

 

 

 

 

silkscreen printing process,

FPC silkscreen printing

FPC silkscreen printing

 

 

 

 

 

 

 

 

 

 

and tooling hole punching for flexible circuit board.

tooling hole auto punching

tooling hole auto punching

 

 

 

 

 

 

 

After FPC production line tour, Julie and Sonic advice some comments for their 2 layers flex circuit board which with impedance control design-in.

With their good suggestions, we know how to make improvement for the flexible printed circuit board production process and the documentation control in future flexible board manufacturing.

By this visiting, both Julie and us know much more of each other and believe there’re lot opportunities for flexible circuits in come future.

Customer Luke visit Best Technology

On Aug 25th, Luke from Australia visited us. The main topics discussed were flexible circuit production process, testing and the improvement solutions.

Luke Visiting Best Technology on Aug 25 2016

Luke Visiting Best Technology on Aug 25 2016

 

 

 

 

 

 

 

 

Firstly we introduced FPC production process to Luke, from raw material cutting, drilling, laminate, stiffener/adhesive tape, silkscreen, IC programming, testing, different outline making method (laser cutting for flexible circuit board prototype, Die-punching for flex board volume production).

The most important things were opening & shorting testing for FPC and dimension and cosmetic looking using 2 D measurement machine. After seeing the E-Tester of his 4 layers flex circuit board, Luke known the board will be tested from both top and bottom side at the same time (We put and tested the flexible board top and bottom side on the E-tester, and the connector of FPC contact with the test pins on the E-Tester), and discussed how to avoid incorrect testing, such as missed or wrong testing point. The Tester was made according to customers’ original Gerber file.

By using 2D measurement machine, we found out how break off trace, hole alignment and other issues affected the function of circuit board.

After that, Luke told us his suggestions on how to make improvement for the production yield and testing and we will try these in future flexible board manufacturing.

By this visiting, both Luke and us know much more of each other and believe there’re lot opportunities for flexible circuits in future.