14-Year Anniversary Celebration of Best Technology-Thank you!

Recently, Best Technology has completed 14 years of its glorious journey. Every small step is worth celebrating. On June 26, 2020, our founder, Peter, Emily, group leaders and all the employees spent this unforgettable festival in union.  

Best Technology Team
Best Technology Team

On Best Technology successful journey, Peter stressed- ‚ÄúThese past 14 years have been a period of growth and a learning experience for us as we went through several trials and errors till we deliver successful business. Today we are proud of the fact that our employees can make great progress day by day after training with us and feel confident taking on tough project-related challenges,thanks for all the endeavour from employees and thanks for the great support from our suppliers and customers. Best Technology‚Äôs continuous development can not do without them.‚ÄĚ

We have come a long way from 2006 when we started off with just 1 people(Peter). Today we are proud to announce that we have nearly 100 employees and many sister companies spread all over China mainland and also have customers in over 150 countries around the world.

number of employees
number of employees

From above, it is evident that there has been a staggering growth in the number of employees in the span of 14 years. This enhanced employee strength has built the roadmap to Best Technology‚Äôs success.

annual sales volume
annual sales volume

The above graph presents our company‚Äôs growth against the years 2006 to 2020. It can be seen that the growth rate is very high from 2006($8000) to 2019($6560,000). At this year 2020, Best Technology still keeps growing with increasing sales volume in spite of COVID-19 outbreak.

Best Technology‚Äôs unique journey has been a brick-by-brick progress and has entailed years of  efforts. Our company‚Äôs commitment in becoming world class distinctive solution of printed circuit board and metal domes in 2025 has paved the way to the series of milestones achieved. These are equally appreciated by the correct leadership of our chairman, Peter.

The primary aim of our company has been to equip the professionals with all possible accoutrements to tackle on-job challenges. Today‚Äôs ever changing face of businesses demands deeper knowledge, quality, and on-time delivery. Customers are always looking out for continuous and improved delivery. The best means to achieve the same is to keep improving.

14-year anniversary
14-year anniversary

We will continue our journey towards innovating the new ways of learning, delivering excellence to the customers and lending a hand to achieve professional goals.

What‚Äôs more, Best Technology‚Äôs 14th-year anniversary celebration is a solemn procession of efforts and dedication of the trainers and staffs who have spent their quality time to provide the best services and meet more expectations of the ever evolving PCB world.

How to improve the bending effect of multilayer rigid-flex PCB?

Normally the rigid-flex PCB need to use in a small space area, and the flex area needs to be bent repeatedly or better bend radius. So many customers are concerned about the bending effect of the flex area, do you know how to improve the bend effect when you design? Here are a few suggestions for your reference.

The first one, the thickness of flex PCB board. The thinner the board, the better the flexibility. Such as below 6 layers stack up with 2 layers flex, we can used 1/3 oz copper instead of 1/2oz or 1oz, and 1/2mil PI instead of 1mil PI, then total thickness will be around 0.1mm.

The second one, adhesiveless material instead of adhesive material. The adhesive in base material will also affect the flexibility. Such as below stack up of flex part, there is no adhesive between Copper and Polyimide, but the coverlay must be glued and then laminated.

The third one, design a loose leaf (air gap) for flex area. Loose leaf can reduce the total thickness of flex part, especially for multilayer flex circuits in rigid-flex PCB design. Such as below sample pictures, no matter 2 layers or 4 layers in flex part, many customers will add one air gap. If you think the flexibility is not very good when we add one air gap, it’s okay to add two or more air gaps for multilayer flex PCB.

If you would like to know more details, please send your questions to our email sales@bestfpc.com

Flex Circuit Specific Terms and Definitions

Recently, I was having a few discussions with someone very new to flex design. I was trying to be helpful and going through several things that are specific to flex and rigid flex design which should be considered as you start your first design. So, this blog is written for those of you who are new to flex and rigid flex, and may be unfamiliar with some of the terms that get volleyed around in conversation.

Flexible Circuit(flex pcb, pcb flex, flexible pcb, flex circuits):  

A pattern of conductive traces bonded on a flexible substrate. There are several different substrates available, the most common being polyimide. Different than rigid materials, these laminates will have rolled annealed (RA) copper for improved flexibility.

flex pcb
flex pcb

Rigid-Flex PCB(rigid flexible pcb):  

This is a hybrid construction, using flex materials in areas that need to bend or flex and rigid materials in areas with dense component areas, surface mount components on both sides of the PCB, and applications with higher layer count, dense routing areas.  Most common rigid materials can be incorporated into a rigid flex construction.

rigid flex pcb
rigid flex pcb

Flex Tails:  

Typically refers to the areas of flex extended out past the rigid portions of the rigid flex. This may be one flex region, or several bands of flex areas that extend in various directions. Rigid flex is often used to solve packaging issues and connect on multiple planes. Flex tails enable this.

Banding:  

Often used to accommodate a shorter flexible area if there is no room for a service loop. Instead of using the full width of the flex region between areas for each inner layer, the area can be divided into smaller bands of equal width for each inner layer, eliminating buckling and stress in that area.                                                                   

Pouch:  

This is a protective barrier material often used in rigid-flex fabrication. Often, this is a coverlay material used to protect exposed flexible materials during processing and is removed from the flexible portion of the board before shipment.

Coverlay:  

A layer of insulating material applied to the flexible circuit to insulate the conductor pattern. Coverlay is typically a layer of polyimide with acrylic adhesive. Film based coverlay is much more flexible than cover-coat materials and highly recommended for dynamically flexing applications or flex that will have a tight bend radius. It is important to be sure to spec enough adhesive to fully encapsulate the copper conductors.

Bend Radius:  

This is the ratio of the bending radius measured to the inside of the bend to the overall thickness in that area.  Typically, recommendations for non-dynamically flexing designs is 10:1 for single and double-sided construction, and 20:1 for multilayer construction. These can be exceeded but should be evaluated carefully. Dynamically flexing applications should be discussed with your fabricator for a recommended stack up.

I always wrote a blog about how to calculate the bending radius of fpc.

Button Plate:  

Fabrication process to selectively electroplate copper to vias and onto the pads capturing the vias. The remaining copper traces do not have electrodeposited copper, increasing the flexibility of the circuit.

I-Beam Effect:  

Stacking conductors on adjacent layers directly on top of one another, increasing the stiffness of the circuit in the bend or fold areas. Staggered conductors are recommended if possible, to retain the maximum flexibility of the circuit.

I hope this helps explain some of the common terminology with flex and rigid-flex materials and design. Please reach out to me with any questions for further information!

We will be exhibiting at electronica Munich 2020

Best Technology, a China- based assembly manufacturer will be exhibiting at electronica Munich 2020 in Bavaria, Germany at booth No. 623(Hall B1) from November 10, 2020 to November 13, 2020(Western Time). Actually, we have participated in this exhibition for continuous 2 years. Here are some pictures for your reference.

pcb exhibition
pcb exhibition
pcb exhibition
pcb exhibition
pcb exhibition
pcb exhibition
pcb exhibition
pcb exhibition

At our exhibition booth, attendees will be able to learn more about our company for PCB manufacturing and PCB assembly technology.

For interested professionals, Best Technology had on hand experts to offer detailed insights and experience on PCB assembly, covering PCB prototype and low/high-volume production. For more information on PCB assembly and fabrication, welcome to visit our booth.

You will see 10mm to 1,500 mm flexible circuit board, from 2 layer rigid-flex circuit to 50 layers, 1/2 OZ copper to 3 OZ, 0.15mm extra thin FR4 PCB to 30 OZ heavy copper, turn-key service from components sourcing,board fabrication(FPC, PCB, MCPCB, Ceramic PCB) and final assembly with programming and testing and metal dome that is used in conjunction with a printed circuit board, flex circuit, or membrane, become normally-open tactile switches. we have four types of metal domes: four legs with size from 5mm-20mm; triangle with size 4mm-12mm; round dome with size 4-16mm, oblong dome with size 3.7mm-58.1mm, and we also make dome with adhesive, named dome array.

You are warmly welcome to see how we can manage the components wastage and efficiency to help save your time, money and energy.

About electronica Munich:

Electronica is the international trade show for electronic components, systems and applications and shows the full range in all its diversity in width and depth as the world’s leading trade fair. It reflects the high degree of innovation throughout the industry. Exhibitors and users in the areas of systems, applications and technologies of electronics can receive the information of the latest innovations and developments in the fields of system peripherals, power engineering to printed circuit boards or EMS.

Welcome to visit us at Booth 623 from November 10, 2020 to November 13, 2020(Western Time).

electronica 2020
electronica 2020

HS Code and Import Tariff Rates of Face Mask in Some Major Countries

Regarding HS code and duty rate of face masks in some major countries, we collected some information in main trade partners (US, Japan, EU, Korea, Taiwan, Australia, New Zealand) of China. This is aimed at the face masks such as personal protective masks without special function components, including medical face masks and disposable face masks. All of below information were published by the custom officially.

US:

According to Harmonized Tariff Schedule of the United States, HTSUS, the HS code of face masks in the US is 6307909889. And the duty rate imported from China is 7%. Regarding tariff imposed, according to announcement from the United States Trade Representative on March 12, 2020, the tariff is excluded for the face masks belonging to this HS code since September 1, 2019. Since then, all the face masks imported from China has been exempted from tariff. You can refer to the below chart for more information.

face mask tariff
face mask tariff

Japan:

The HS code of face masks in Japan is 630790029. The duty rate imported from China is 4.7%. To learn more, see below:

face mask tariff
face mask tariff

EU:

The duty paragraph for face masks imported from China in EU is 6307909899 and the duty rate is 6.3%. You can see below for more information:

face mask tariff
face mask tariff

Korea:

The duty paragraph for face masks imported from China in Korea is 6307909000, and normally, the tariff is 10%. However, from March 18, 2020 to June 30, 2020, Korea has been suspending imposing tariff for face masks from China(0 tariff currently), see below for more information:

face mask tariff
face mask tariff

Taiwan, China:

The HS code(also referred to as duty paragraph) of face masks imported from China mainland in Taiwan is 63079050.

And, the duty rate for face masks imported from China mainland is 7.5%. However, from February 27, 2020 to May 26, 2020, provisional tax rates (also referred to as‚Äúflexible tax rate‚ÄĚin Taiwan area) for face masks was carried out in Taiwan area, i.e. the tariff is zero. You can see below for more information:

face mask tariff
face mask tariff

Australia:

The HS code of face masks imported from China in Australia is 63079099 and the duty rate is 5%. See below for more information:

face mask tariff
face mask tariff

New Zealand:

The HS code of face masks imported from China in New Zealand is 63079028. Zero tariff is applied to the face masks imported from China according to ‚ÄúNew free trade agreement‚ÄĚ. See below for more information:

face mask tariff
face mask tariff

To learn more, see below document:

face-mask-hs-code-and-tariff-in-some-countries

Hope the above information is useful to you. And if you have any queries, comments or suggestions, contact us anytime. We will be glad to help you.